Create a 3D text spot on a product space
Step 1: Measure the product
Measure the length, height & width of the product. You will need this later for the Anchor spot.
Step 2: Take a picture of the product
Take a picture of the product. Make sure the lighting is correct and the front of the product is straight on it and not skewed. (Examples of correct/incorrect)
Step 3: Cut the front of the product from the photo
Make sure you cut out the front of the product with a program like photoshop or paint etc. Remove all other unnecessary information from the photo.
Step 4: Create a new space
In Fectar Studio, you can choose to create a new space. Click on 'Create new Space' and then select 'Empty Space'. (learn how to add an ‘empty space’ here).
Step 5: Add your Anchor
Add a 'New Spot' in Fectar Studio. Then go to 'Interaction' and select 'Anchor'. (learn how to add an anchor spot here).
Step 6: Anchor settings
- Set the width of the anchor. This is the width you have measured for the product.
- Turn both settings on. This will only show your space when it can find the anchor and the space will move with the anchor.
- If you want to experience the product standing (which we do in this case), choose the wall orientation.
Step 7: Choose a 3D text spot
Add a text to put on top of the box. (Click here for more information to add a 3D text spot).
The anchor point is in the center of the product. If you want to put the text on top of the product you will have to add half the length of the product on the Y-axis. In this case that is half of 12 centimeters. Add 6 centimeters to the Y-axis of the 3D text spot.
Alignment: Set it to the middle. Then your text will align in the middle of the product.
Step 8: Publish your space
Well done! You have placed a 3D text spot on the product. Now publish your space in the fectar app. (Click here for more information to publish your space).
Example of the result: